Hi Hyperion Team, I followed your guide with the following configuration: Raspberry Pi 3b+ 2,5m LED Strip https://www.aliexpress.com/item/1M-...966.html?spm=a2g0s.90423188.8.131.52fe4c4d1Pcvhf Mean Well RS 50-5 https://www.meanwell-web.com/en-gb/ac-dc-single-output-enclosed-power-supply-output-rs--50--5 The LED strip is cut into 5 pieces and connected with clips. All in all 84 LEDs. The RPI is running on the newest LibreElec and with the Hyperion configuration from the guid. When I start hyperion with the HyperCon the first two LEDs are flickering. The other LEDs don't show anything. After some time of flickering the second LEDs stays on one color. What am I missing? Thanks a lot for your help!