1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help with my setup, Receiver has 2 x HDMI2.2 output. Looking for 4k to 1080 scaler with RCA

Discussion in 'Hyperion Hardware' started by graham foster, 24 December 2018.

  1. graham foster

    graham foster New Member

    Messages:
    2
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +PhilipsHue
    I've had a look through the forums but i cant see anyone with my setup.

    I'm new to 4k, previously my setup was working fine as i was only running 1080p.
    My Pioneer receiver has 2 x 4k HDMI2.2 outputs, so this was fine connecting one output to the tv and one output to the HDMI to AV converter.(https://www.ebay.ie/itm/HDMI-to-3-R...h=item3f990e700c:g:xMsAAOSw5lJazUA9:rk:1:pf:0)

    Now with my new 4k tv, i seems the Pioneer receiver see's the HDMI to Av unit as a 1080p device. So both outputs go to 1080p as it looks like the receiver doesn't have a separate downscaler per channel. So no 4k on my new TV, unless i disable the HDMI output going to the HDMI to AV device.

    I don't think i need a hdmi splitter as my receiver has the hdmi outputs, so just a cheap scaler to convert 4k 60hertz to 1080p, or even better straight to rca. Rather use less items in the setup if possible.

    Anyone have any idea's?

    Thank you.
     
    Last edited: 24 December 2018
  2. graham foster

    graham foster New Member

    Messages:
    2
    Hardware:
    RPi1/Zero, RPi2, RPi3, 32/64bit, +Arduino, +PhilipsHue
  3. djcesar

    djcesar New Member

    Messages:
    1
    Hardware:
    RPi3, 32/64bit, +PhilipsHue
    following thread