I hope to see more setups from other people in the future but some people need to start . So here is my Hyperion setup. About a year ago I finished my first setup after a lot of error. My technical knowledge isn't that great but its getting better and better while working on this project. That's why I updated a week ago to v2.0 with a raspberry pi 3 . I dont have that much photo's of the whole building progress so I try to give you a little idea through some of them. The first thing I did was buying 3 meters of aluminium strip to make a frame that I could fit behind my television and wall mount. I used this type of strip: With a saw I made the ends of the strip fit in a 90 degree corners and glued the frame together with 2 component epoxy. After a day the epoxy had hardened and made a really strong frame so mounted in the APA120 led strip. It works! This is how it fits behind my television. Fits perfect between the bracket of my wall mount and the tv. Still work in progress, it's less messy now because I fitted the rpi behind my television. I also bought 2 living color lights to extend this setup but still have some issues with getting both systems on together. So what do you think? If you have any questions let me know. Big thanks to everyone who made this project possible!