1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + Other Software Not starting on Boot

Discussion in 'Software Support' started by CoLuxe, 18 April 2018.

  1. CoLuxe

    CoLuxe New Member

    Messages:
    1
    Hardware:
    RPi1/Zero
    Hay,

    my Hyperion is not starting, when I put the RPI Zero on.
    I have to do that manually over Hypercon (First Stop, the Start) or over SSH ("service hyperion restart").
    Im using Raspbian Lite.

    In the Log is only this:

    Code:
    SSH Traffic:
    ssh connected
    ssh out:     sudo journalctl -u hyperion.service 2>/dev/null
    ssh in:     -- No entries --
    
    My Config:
    {
    // DEVICE CONFIGURATION
    "device" :
    {
    "name" : "MyHyperionConfig",
    "type" : "ws2801",
    "output" : "/dev/spidev0.0",
    "rate" : 1000000,
    "colorOrder" : "rbg"
    },

    // COLOR CALIBRATION CONFIG
    "color" :
    {
    "channelAdjustment" :
    [
    {
    "id" : "default",
    "leds" : "*",
    "pureRed" :
    {
    "redChannel" : 180,
    "greenChannel" : 0,
    "blueChannel" : 0
    },
    "pureGreen" :
    {
    "redChannel" : 30,
    "greenChannel" : 255,
    "blueChannel" : 10
    },
    "pureBlue" :
    {
    "redChannel" : 10,
    "greenChannel" : 0,
    "blueChannel" : 200
    }
    }
    ],
    "temperature" :
    [
    {
    "id" : "default",
    "leds" : "*",
    "correctionValues" :
    {
    "red" : 255,
    "green" : 255,
    "blue" : 255
    }
    }
    ],
    "transform" :
    [
    {
    "id" : "default",
    "leds" : "*",
    "hsl" :
    {
    "saturationGain" : 1.0000,
    "luminanceGain" : 1.0000,
    "luminanceMinimum" : 0.3000
    },
    "red" :
    {
    "threshold" : 0.0000,
    "gamma" : 2.7000
    },
    "green" :
    {
    "threshold" : 0.0000,
    "gamma" : 2.5000
    },
    "blue" :
    {
    "threshold" : 0.0000,
    "gamma" : 2.5000
    }
    }
    ],
    // SMOOTHING CONFIG
    "smoothing" :
    {
    "type" : "linear",
    "time_ms" : 100,
    "updateFrequency" : 100.0000,
    "updateDelay" : 0
    }
    },

    // NO V4L2 GRABBER CONFIG
    // BLACKBORDER CONFIG
    "blackborderdetector" :
    {
    "enable" : true,
    "threshold" : 0.0,
    "unknownFrameCnt" : 600,
    "borderFrameCnt" : 50,
    "maxInconsistentCnt" : 10,
    "blurRemoveCnt" : 1,
    "mode" : "default"
    },

    // BOOTEFFECT CONFIG
    "bootsequence" :
    {
    "color" : [0,0,0],
    "effect" : "Rainbow swirl fast",
    "duration_ms" : 3000,
    "priority" : 700
    },

    // JSON SERVER CONFIG
    "jsonServer" :
    {
    "port" : 19444
    },

    // PROTO SERVER CONFIG
    "protoServer" :
    {
    "port" : 19445
    },

    // EFFECT PATH
    "effects" :
    {
    "paths" :
    [
    "/storage/hyperion/effects",
    "/usr/share/hyperion/effects"
    ]
    },

    // NO FRAME GRABBER CONFIG
    // NO KODI CHECK CONFIG
    // NO BOBLIGHT SERVER CONFIG
    // NO JSON/PROTO FORWARD CONFIG

    // LED CONFIGURATION
    "leds" :
    [
    {
    "index" : 0,
    "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 1,
    "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 2,
    "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 3,
    "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 4,
    "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 5,
    "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 6,
    "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 7,
    "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 8,
    "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 9,
    "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 10,
    "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 11,
    "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 12,
    "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 13,
    "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 14,
    "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 15,
    "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.9200, "maximum" : 1.0000 }
    },
    {
    "index" : 16,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.8889, "maximum" : 1.0000 }
    },
    {
    "index" : 17,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.7778, "maximum" : 0.8889 }
    },
    {
    "index" : 18,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.6667, "maximum" : 0.7778 }
    },
    {
    "index" : 19,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.5556, "maximum" : 0.6667 }
    },
    {
    "index" : 20,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.4444, "maximum" : 0.5556 }
    },
    {
    "index" : 21,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.3333, "maximum" : 0.4444 }
    },
    {
    "index" : 22,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.2222, "maximum" : 0.3333 }
    },
    {
    "index" : 23,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.1111, "maximum" : 0.2222 }
    },
    {
    "index" : 24,
    "hscan" : { "minimum" : 0.9500, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.1111 }
    },
    {
    "index" : 25,
    "hscan" : { "minimum" : 0.9375, "maximum" : 1.0000 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 26,
    "hscan" : { "minimum" : 0.8750, "maximum" : 0.9375 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 27,
    "hscan" : { "minimum" : 0.8125, "maximum" : 0.8750 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 28,
    "hscan" : { "minimum" : 0.7500, "maximum" : 0.8125 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 29,
    "hscan" : { "minimum" : 0.6875, "maximum" : 0.7500 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 30,
    "hscan" : { "minimum" : 0.6250, "maximum" : 0.6875 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 31,
    "hscan" : { "minimum" : 0.5625, "maximum" : 0.6250 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 32,
    "hscan" : { "minimum" : 0.5000, "maximum" : 0.5625 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 33,
    "hscan" : { "minimum" : 0.4375, "maximum" : 0.5000 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 34,
    "hscan" : { "minimum" : 0.3750, "maximum" : 0.4375 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 35,
    "hscan" : { "minimum" : 0.3125, "maximum" : 0.3750 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 36,
    "hscan" : { "minimum" : 0.2500, "maximum" : 0.3125 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 37,
    "hscan" : { "minimum" : 0.1875, "maximum" : 0.2500 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 38,
    "hscan" : { "minimum" : 0.1250, "maximum" : 0.1875 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 39,
    "hscan" : { "minimum" : 0.0625, "maximum" : 0.1250 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    },
    {
    "index" : 40,
    "hscan" : { "minimum" : 0.0000, "maximum" : 0.0625 },
    "vscan" : { "minimum" : 0.0000, "maximum" : 0.0800 }
    }
    ],

    "endOfJson" : "endOfJson"
    }

    Thanks for your help!
     
  2. abrenoch

    abrenoch Android Grabber Developer

    Messages:
    84
    Hardware:
    RPi1/Zero, RPi2
    I want to bump this thread... I am having the exact same issue, also running on a pi zero.

    I'm wondering if maybe just delaying the service startup would help with the problem
     
  3. Ryan

    Ryan New Member

    Messages:
    11
    Hardware:
    RPi1/Zero, RPi3
    Same problem here. Have you already found a solution?
     
    Last edited: 6 October 2018
  4. Peadar

    Peadar New Member

    Messages:
    3
    Hardware:
    RPi3
    Same problem but with pi 2
     
  5. Ryan

    Ryan New Member

    Messages:
    11
    Hardware:
    RPi1/Zero, RPi3
    Today i tried using Raspbien Jessie Lite instead of Stretch Lite. On Jessie it works just fine!
     
    • Like Like x 1
  6. rkayd

    rkayd New Member

    Messages:
    2
    This solved my problem. Running a Raspberry Pi Zero W, Hyperion now starts on boot/power up.