1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Rpi zero w + OSMC + apa102(SK9822) ( any HDMI)

Discussion in 'Hyperion Setup Showcase' started by Vlad, 14 August 2018.

  1. Vlad

    Vlad New Member

    Messages:
    12
    Hardware:
    RPi1/Zero
    To turn on and off i used reley on 5v and rf remote ( it is not good for sd card , but now i have remote =)))

    1)rpi zero w(
    https://ru.aliexpress.com/item/2017...ec58-4118-93b6-88fce07109e4&priceBeautifyAB=0)

    2)hdmi to av
    (https://ru.aliexpress.com/item/VOXL...32815006229.html?spm=a2g0s.9042311.0.0.Mlaez8 )

    3)apa 102
    (https://ru.aliexpress.com/item/1m-5...lgo_pvid=812d324b-7533-4165-a9fc-dfe216d72c61 )

    4)utv007 (
    https://ru.aliexpress.com/item/BELC...32314462209.html?spm=a2g0s.9042311.0.0.DvSAlc )

    5)hdmi splitter 4k (https://ru.aliexpress.com/item/HDCP...d176271&transAbTest=ae803_1&priceBeautifyAB=0)


    6
    ) power 5v 10a (
    https://ru.aliexpress.com/item/5V-L...id=8432765d-6b8d-4cfa-b75f-5358441177b9&tpp=1)

    7) 4 pin connector (i like it =)) )
    https://ru.aliexpress.com/item/5-pa...444.html?spm=a2g0s.9042311.0.0.274233ed11hYSm


    8)hdmi corner
    (https://ru.aliexpress.com/item/Ugreen-HDMI-male-to-HDMI-female-cable-adapter-converter-extender-90-degree-angle-270-degree-angle/32403914176.html?spm=a2g0v.10010108.1000014.4.59271447YLw8s4&scm=1007.13338.98644.000000000000000&scm_id=1007.13338.98644.000000000000000&scm-url=1007.13338.98644.000000000000000&pvid=ecf1ec2e-b74a-467e-a39f-66ff76e95872&_t=pvid:ecf1ec2e-b74a-467e-a39f-66ff76e95872,scm-url:1007.13338.98644.000000000000000 )


    9)hdmi 15 cm (left to left
    ) ( https://ru.aliexpress.com/item/HDMI...6bdbea2&transAbTest=ae803_1&priceBeautifyAB=0)

    1
    0)rf remote (https://ru.aliexpress.com/item/2-ke...id=d446a4fc-07b8-4636-bef6-6f998b9c1cc4&tpp=1)


    11) rf reley ( i used this pcb but only changed relay to 5 v and soldered on resistor smd 221 another resistor smd 301( see on photo) , or you can put only about 600 ohm smd , because with stock resistor when strip turns on reley switches off) https://ru.aliexpress.com/item/QIACHIP-DC-12V-1CH-433MHz-Universal-Wireless-Remote-Control-Switch-RF-Relay-Receiver-433-MHz-Transmitter/32831641763.html?spm=a2g0s.9042311.0.0.274233edI9JJR6
    Снимок.PNG


    12)reley 5v (https://ru.aliexpress.com/item/10PC...924.html?spm=a2g0s.9042311.0.0.51e933edIVCgNd )

    13) resistor smd 301
    (https://ru.aliexpress.com/item/500p...ff101a2&transAbTest=ae803_2&priceBeautifyAB=0 )


    IMG_E7172-min.JPG


    268 led









    IMG_7140.JPG IMG_7141.JPG IMG_7142.JPG IMG_7143.JPG IMG_7144.JPG IMG_7146.JPG IMG_7965.JPG IMG_7969.JPG IMG_7970.JPG IMG_8038-min.JPG IMG_8039.JPG IMG_8040.JPG IMG_7974.JPG IMG_7977-min.JPG IMG_8047.JPG
     
    Last edited: 18 August 2018
  2. Vlad

    Vlad New Member

    Messages:
    12
    Hardware:
    RPi1/Zero
  3. unforsaken

    unforsaken New Member

    Messages:
    1
    Hardware:
    RPi1/Zero, RPi3
    Hello @Vlad

    You did a FANTASTIC job in building that setup. I'm actually interested in doing a similar setup. Is it possible for you to upload the 3D obj/stl file for the 3D Printed enclosure/box for this setup?

    Thank you, and keep up the good work!
     
    • Like Like x 1