1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

RPi + OSMC UTV007 inconsistent

Discussion in 'Software Support' started by Digiwill, 4 January 2019.

  1. Digiwill

    Digiwill New Member

    Messages:
    9
    Hardware:
    RPi3, +Arduino
    Hi, I've been working with this project for the last few weekends and have gotten no where. My setup right now is HDMI cable going to this splitter. That splitter then goes to my tv and to this converter which goes to the yellow port of this grabber. The grabber has been plugged into the pi directly and a powered external usb hub plugged into the pi. Other then that my pi is plugged into a Arduino via usb with the 5th pin used as output.

    My problems have been with the grabber as I find it to be horrible inconsistent. For instance tonight for about 5 minutes the grabber worked perfectly and I got an image of the HDMI out in full color, after 5 minutes it become really dark and black and white and then I started getting a black screen completely no output(all of this happened in a matter of minutes so I could not grab screenshots of what the grabber got unfortunately). Other days I'll get only cetin parts of the piture showing up in super bright squares of light randomly around the screenshot and the rest is just black(a little like really dark static but correlating to what's on the screen kind of) .

    I've tried switching NSCT and PAL on both the HDMI converter and the Hyperion config file to no avail (when I did get the screen to show up in color for a couple minutes the converter was set to PAL with the config in this post)

    My logs and config files are attached as txt files from pastebin, I wasn't sure how to get that working so it embeded nicely.

    Any help would be much appreciated thanks for taking the time to read.
     

    Attached Files: